Access Network Devices over ZPA

Hello Community, I am trying to investigate whether or not ZPA can be used for non web-based traffic.

For example, network devices. If I configure an Application segment, for example with a Router IP, then use TCP=22, Am I going to be able to ssh to that router?

Hello Josh,

Yes you should be able to send non-web traffic (TCP+UDP) with Zscaler Client Connector enabled with ZPA.

In your enable SSH connection to the network device should work.

Regards,
Shujaat

Great, thanks, so I should be able to use a tool like Putty then, right?

Thanks a lot!!

Hello Josh,

That is correct. After the client connector is enrolled to ZPA (Private Access tab visible) then you should be able to access SSH server over FQDN/IP address which is configured in the application segment.
image

Regards,
Shujaat

1 Like

Thank you so much sjaffrey!!!
That clarifies a lot for me.
Thanks