Zapp and 100.64

Hello All,
When local networks consist of 100.64.0.0/22, tunnel mode seem to work fine, however once connecting to a split tunnel VPN, the app fails to connect, probably due to the static route to this network being added and pointing to the virtual adapter representing the VPN connection.

Any solution for this scenario? Aside for switching to local proxy…

Thanks!

I’m pretty sure you shouldn’t be using 100.64.0.0/22 for your local client network. This is reserved for special use by telecoms providers.

It’s a given fact :sweat_smile:
Now we need to work with it to integrate with Zapp…

Sounds like switching to local proxy is the only option if 10.64.0.0/22 is going to be shared between the two networks.